Routers connect multiple devices over a single network. Routers give an entrance to both the Internet and alternative networks. It makes communication between networks easy. Also, it provides security, policies, and services that extend the aptitude of IP to support applications over a network. Every device on the internet needs a unique identifier known as IP address.

There are many IP’s and among them, 192.168.100.1 is a private IP address i.e., it can be assigned to any local area device. 192.168.100.1 can be manually assigned to any local network. It can even be assigned to a laptop computer, smart television, tablet, and many more devices.

This IP address is used as a default address for local internet connection with the help of wireless routers i.e., it is the first inbuilt IP address which the device uses when it is shipped out from the manufacturer. It is programmed in such a means that the devices that fall under this network system specifically, only they can be connected with the network system.

This address may be employed by routers, modems or any other IoT device. Multiple brands of routers which use this IP address are Motorola, Lenovo, Netgear, Ubee and many more.

Access and Login to 192.168.100.1 Admin panel

To proceed using 192.168.100.1 you first need to access the administration panel. Following steps are must to access the admin panel:

1. Open a web browser on your computer system. We advise you to use the latest version of the web browser.
2. Hit the button “Access Router Page” to access this IP address.

Wait for some seconds for admin panel to load fully.

3. Now a page will open. Enter the default username and password which is available in the user manual and press enter.
4. Finally, the admin page of 192.168.100.1 is now open to use. Now you can start configuring your devices.
5. You can change the type of your internet connection, change the name of the network or add new devices in the admin panel.
6. Also, you can experiment with the bandwidth and transmission rate. You can also monitor various devices connected to your router from 192.168.100.1 admin panel.
7. We advise you to change the default username and password of your router to avoid any kind of security risks.

Default User and Password

Generally, router manufacturing firms set default username and passwords. So all routers, come with a permanent set of username and password which you can modify in future if you wish to do so. Some of the username and passwords are the admin, none and password, none, admin, w2402, Motorola. You can notice the login information of your router within the user manual and at the bottom or back of your router. Now, through the browser window of your device log in to your account using your credentials.

1. Enter the IP address in the browser window.
2. Enter default username and password in the login area.
3. Now you can change your default username and password from here.
4. After setting all the required fields click Apply.

Now, everything will be done and you are equipped to use your login panel using your new username and password.

What to do if you cannot access 192.168.100.1 Login Page

Though logging into the admin panel of 192.168.100.1 is very easy but still, some users face difficulties in logging into the panel. Some of the problems which the users may face are:

1. Connection issue
2. Signal drop-offs
3. Firmware glitch

These issues are easy to solve by using some very easy steps. Some of them are:

1. Make sure that you have a proper Ethernet cable connection
2. Reset the router
3. Troubleshoot helps as well

Moreover, the quality of cable can be another reason for your issue. Also, check whether the diode lights are on or not. You should also check the all-around security of your router connection.

How to Change the password of your router

Changing the password of your router is the easiest job. Also, it is the most important task that we do for security purposes. Follow these straightforward and easy steps to change the password of your router.

1. At first, open web browser
2. Type the URL of your IP address
3. Then type your current username and password on the displayed page
4. Now go to settings
5. At last from settings, you can change the username and the password of your router easily without any difficulties.

How to Change the address 192.168.100.1

Many times due to some IP conflict issues we require to change the IP address of routers so that they can connect with every device. Some of the steps by which you can easily change the default address of your router are:

1. Open the admin panel of original IP address
2. Log in and open settings
3. Click on LAN and select configure the IP address
4. Type the new IP address in the required area and click OK
5. Now login again using the new IP address as required.

By following the above simple and easy steps you can easily change the default IP address of your router.

Conclusion

The IP address 192.168.100.1 is the private IP address so users cannot connect to this network system from outside the house which you can do with public IP addresses. This private IP address is only available to use within local area network systems. Also, ensure that you enter the right IP address. Most users think that 192.168.100.1 and 192.168.1.100 are same addresses but this is not so.

These two addresses are different addresses. Assure to have a proper network connection in your home or office for the smooth running of the network system. If you want to configure the devices with the router it is important to log into the admin panel because of it only the login page which allows configuration of devices. To bring changes in the device settings it is just to reach to the admin panel.

192.168.1.2 local IP address is mainly used by many manufacturing companies to give their user access to the main settings of the router via the web interface. Hence, this allows the user to alter the settings of the router according to his wishes. 192.168.1.2 IP address also lets the user change its default password, network refresh rate and other Service Set Identifier (SSID) settings.

In this article, our main aim is to educate the masses with more general information about these kinds of IP addresses and this one in particular and to help them when they forget their necessary login credentials by restarting the router. By the end of this article, you will also learn how to login to this IP address through the web interface.

How To Access 192.168.1.2 IP Address

1.  To initiate the process you have to click on “Access Router Panel or Access Router Panel -2“button mentioned below.

NOTE: – The process is platform independent, so it does not matter if you are using your smartphone or laptop or desktop to log in as long as the device is connected to the same WiFi network. The fundamental requirement though, is, your browser must be one of the sophisticated ones like Mozilla Firefox or Google Chrome or even the latest Microsoft Edge since HTML5 pop-up support is essential for the process. Also, above tool might take a few seconds to load the 192.168.1.2 Admin Panel.

2. Now that you have hit enter, you will welcome to a page, and you would ask to enter your user id and password. Enter your default user id and password (as provided by the manufacturer over here).

3. Once you have entered your proper credentials correctly, you will be able to login directly to the main page of your firmware and make the changes accordingly and see your router reflect the alterations in its working.

WARNING: – DO NOT fiddle around or manipulate the settings which you don’t understand because if you mess up, you will have to contact your Internet Service Provider (ISP) to fix the problem.

4. Once you have successfully completed the third step, you will still find that you are unable to access some of the settings. Those are the administrative settings which the administrative authorities can access.

However, if you wish to access those settings too, you must log in with the admin ID and password. Surprisingly, there is no other secret or special admin password and the entire process is quite easy to execute. To do this, you have to enter your IP address in the bar once again and hit enter. This time, you must type “admin” in both the fields of the password as well as user ID when they ask you and voilà!

What to Do If I forget Router Username & Password?

It is one of the most common problems that the user faces. Human beings bounded to dismiss such things from their memories so if you are one and you happen to have forgotten your UID or Password then don’t panic, and we know the solution.

• You must reset your router to factory default by pressing the reset button present on the router.
• If you cannot find it, it is the small hole like button usually present at the bottom of the router. All you have to do is press and hold the button for about 10 to 15 seconds with a pencil or pen. After this, the lights on your router would flash and blink. Thus indicating that the settings have reset. This should let you log in to the router’s web interface now.
• We hope that our article helped you get the best out of your router by changing its settings and satisfied you. Good luck!

10.0.0.1 is one of the very bizarre IP addresses among the routers (192.68.0.1, 192.68.1.1). This default gateway is a special class of IP address for the use of private networks. You can use it to log in and connect to a server.

10.0.0.1 however, is the IP address used by big businesses which have a computer-based network and is used to serve different purposes.

Now that you have an elemental understanding of the IP address we can now focus on how to log into this IP address and the things you must remember and do if you happen to dismiss from your mind the credentials.

How To Login To The IP Address 10.0.0.1

Step 1 – Click on “Access Router Panel or Access Router Panel -2” button given below.

Note: It does not matter if you are opening this from your desktop or laptop or smartphone. Also, it is advised that you use an advanced browser to do this, preferably Mozilla Firefox or Google Chrome because HTML-5 pop-up support is essential to complete this action.

Step 2- On pressing enter, you will welcome to a page which will display the different settings of your router.

Step 3 – To gain access though, you have to input the default password and address as given on the box or as provided in the manufacturer’s website, this is to ensure the safety of your router. In case, you forgot them then check out our handy guide to recover them or list of default router passwords.

Note: In case there is some issue and you have forgotten the default login credentials, you can refer to the drop down when you are going to get them. You will have to click on the menu and select the manufacturer and model of your router. Automatically, you will get the default user-id and password for logging in. You can find your router’s IP address here.

Step 4 – You can now directly go through the various functions and settings that give you access and make changes according to your needs. Also, in the web interface, you will be able to update router firmware changes to the networks, refresh the rates and more.

What To Do When You Have Forgotten Your Password And User Id

It is one of the most common problems when the user faces difficulty accessing their router settings having forgotten their user id and password. But hey, we all forget our passwords after changing them recently, right? So, don’t stress yourself, there is a way out of this.

Step 1 – Reset your router to factory default. To know that, you will have to look for the reset button which is present somewhere on the router (Usually at the bottom).

Step 2 – Now that you have found it, you must have noticed a tiny sized button. Use a toothpick or a pen to press it and hold it down for about 15 seconds.

Step 3 – Having executed the second step successfully, you will notice your router’s light blink and your router will restart itself. It indicates that the settings of your have restored to factory default.

In Conclusion

If you are still having problems in setting your router to the factory default, you can simply manually search your router name and its password from the list given here.

So, that is how you get yourself out of this fix of forgetting your router’s password and user ID. Hope, that I have been of help to you. Good Luck.

192.168.0.1 and 192.168.1.1 are the IP addresses mostly used for the gateways of the majority of the manufacturing companies, but like most out of the box, Chinese innovations, the Chinese telecommunication equipment company Huawei uses it to access the different functions of the router. In this article, we will talk about the 192.168.8.1 IP address and also about how to login to this IP address and what to do when you lack the necessary login credentials. Let’s crack on then.

Requirements for 192.168.8.1 IP Address?

There are a few requirements that we must follow in order to log in to this IP address and make the required changes. The most important being us to be in the vicinity of the router’s network or simply put, we should be connected to the same network as the router in order to make the necessary changes in the firmware since it is a private IP address. The biggest constraint about this IP address is that it cannot be found on the world wide web and hence it forces us to be in the vicinity of the router’s network in order to access the web interface. Our web browser should be a sophisticated one (Mozilla Firefox, Google Chrome, etc.) since this process requires HTML5 pop-up support.

Also Check: – 192.168.1.1

How To Login 192.168.8.1 IP Address

 1. First of all, click on the below button termed as Access Router Panel or Access Router Panel -2 to access 192.168.8.1 Admin Panel.

NOTE: This process is platform independent. Hence, it does not matter if you connect via your smartphone or your laptop or your desktop. Also, it will take a few seconds to load the Administrator panel.

2. When you have entered the address, you will welcome to a page and prompted to enter your user ID and password. Enter the default credentials that came with the router to access the homepage of the firmware.

3. Once you have done entering the correct credentials, you will get authentication, and you will get access to the different options for the firmware update, security management and more. Depending upon the level of your authenticated authority, they will allow you to make the changes in the settings as you please.

4. If you notice that you are unable to make certain changes in the router settings, it is perhaps because of your degree of authority. I would suggest you to login to this IP address again with the credentials made for administrative authorities to access those settings provided you know what you are doing. In order to do so, you retype the address in the address bar of your browser and enter “admin” in both the fields of user ID as well as a password when prompted to do so (This may or may not work on all the routers but definitely works on D-Link).

Things to Do When You Have Forgotten Your User ID And Password

You might have forgotten your user ID and password, for the time being, it is only natural for us to do so. Do not panic though; we have got your back. This is how you can take yourself out of this mess.

• Reset your router to factory default. To know that, you will have to look for the reset button which is present somewhere on the router (Usually at the bottom).
• Now that you have found it, you must have noticed a very small sized button. Use a toothpick or a pen to press it and hold it down for out 15 seconds.
• Having executed the second step successfully, you will notice your router’s light blink and your router will restart itself. This indicates that the settings of your router have restored to factory default.

If your modem manufactures the companies like Our Way or GIGAFAST, then this article would come very handy to you. I hope that I have been of help to you by providing you with all the necessary general information on 192.168.8.1. Good Luck!

192.168.0.1 is a very common IP address. Even if you are a person who does not have much knowledge about Internet Protocols and IP Addresses, you are bound to know the absolute elemental notions of them. Basically, it is a unique address generated for every device connected to a network among other networks. If there is a need to, it lets other devices connect to your machine.

About 192.168.0.1 IP Address

In this article, we will cover everything that there is to know about the address 192.168.0.1. This default IP address lets you modify the router settings of D-Link and Netgear routers. Hence, we need to learn about the proper use of its gateway.

Uses of 192.168.0.1 IP Address

Before knowing more about this private IP address (no one else can access this outside your private network), we will first gather some knowledge about its uses.

• You can change the authentication type
• Data Rate
• Fragment threshold
• Network SSID (Service Set Identifier)
• Wireless blocking
• WiFi multicast to unicast

and much more

You will need a password and User ID in order to log into this private IP address and make the necessary changes in the firmware of your modem which will help you a lot regarding both basic as well as advanced settings of your router.

How To Login 192.168.0.1 IP Address

1. First click on “Access Router Panel or Access Router Panel – 2” button which is given below.

WARNING: – The platform (smartphone, laptop or desktop) you use to log into the IP address is irrelevant as long as the device is connected to the same network as the router. Also, your software should not be outdated and obsolete or older than three years, and your browser must be one of the advanced one like Google Chrome and Mozilla Firefox or perhaps even Microsoft Edge since this procedure requires HTML-5 pop-up support.

2. Now that you have entered the IP address, you will be asked to enter the user id and password to which you must enter the default login credentials. You can refer to them by either visiting the manufacturer’s website or by checking the ones listed on the package of your router.

3. In case you do not remember your default password and User ID, try typing “admin” for both the fields. This works just fine for D-Link routers.

4. Again, if you cannot identify your modem and its default credentials, there is a list given below which will help you identify. Do not worry.

5. Once you have entered your proper credentials, you will be welcomed to the settings page of your router where you will be able to access both the basic as well as the advanced settings.

WARNING: – DO NOT fiddle around or manipulate the settings which you don’t understand because if you mess up, you will have to contact your Internet Service Provider (ISP) to fix the problem.

NOTE: – If you do not understand certain settings, always Google before you decide to tweak it. You must always keep in your head the fact that the firmware of a router is a sensitive piece of software which can easily mess up if you are not careful enough.

Steps to Find Your Router’s IP Address

It might happen that your IP address isn’t 192.168.0.1 and that is perfectly okay, all routers do not have the same IP address. So, here is how you can find your router IP address easily.

Step 1 – Press the Windows + R buttons simultaneously to invoke the run window.

Step 2 – Type CMD and hit enter in the text box that opens up.

Step 3 – The command prompt would open up after you have typed the above word in the run menu.

Step 4 – Copy and paste this word into the command prompt and hit enter once you do that.

Step 5 – You will now see a bunch of different IP addresses. One of which will mention as a default gateway IP address. This IP address is the one that you are looking for.

What to Do If You Have Forgotten Your Default Login Credentials?

It is one of the most common problems when the user faces problem accessing their router settings having forgotten their user id and password. But hey, we all forget our passwords after changing them recently, right? So, don’t stress yourself, there is a way out of this.

You can do one of three things – reset the router to its factory settings, reset the router using a web-based setup page or change the credentials by using the administrative privileges. The most straightforward and time-consuming of which is the first one.

How to  Reset Your Router to Its Factory Settings

1. Reset your router to factory default. To know that, you will have to look for the reset button. The button which is present somewhere on the router (Usually at the bottom).
2. Now that you have found it, you must have noticed a very small sized button. Use a toothpick or a pen to press it and hold it down for about 15 seconds.
3. Having executed the second step successfully, you will notice your router’s light blink and your router will restart itself. This indicates that the settings of your have restored to factory default.

Troubleshooting An Unresponsive Router

Sometimes it just so happens that your router becomes unresponsive to the commands of your system and hangs up whenever you input a request or command. So, we have certain simple steps again for you to follow in order to troubleshoot your router.

1. If your router connects to your network by WiFi, check whether your connection is via Ethernet cable or not.

2. Check if the router is receiving proper power supply and the power cord is in working condition.

3. Check the LED status of your router. If it is red, then there is something fishy with your landline or dial-up connection.

So, this was all you needed to know regarding the gateway of your 192.168.01 router. If you still do not know what to do, then I would recommend you to re-read the article once more. Cheers to you for getting more out of your router. Good Luck!